Advantages of Taylor Plate Heat Exchanger

Advantages of Taylor Plate Heat Exchanger


Advantages of Taylor Plate Heat Exchanger

1. Light weight
2. Low price using the same material, in the same heat transfer area, the plate heat exchanger price is about 40% to 60% lower than the shell.
3. Production of convenience plate heat exchanger plate is the use of stamping processing, high degree of standardization, and a large number of production, shell and tube heat exchanger is generally produced by hand.
4. High heat transfer coefficient
5. Logarithmic mean temperature difference
6. Small footprint
7. Easy to change the heat transfer area or process combination, as long as the increase or decrease of several plates, you can achieve the purpose of increasing or reducing the heat transfer area; change the plate array or replace a few plates, you can achieve the required process portfolio , To adapt to the new heat transfer conditions, and shell and tube heat exchanger heat transfer area is almost impossible to increase.
8. Easy to clean frame-type plate heat exchanger as long as the loose compression bolts, you can release the board, remove the plate for mechanical cleaning, which requires frequent cleaning equipment, heat transfer process is very convenient.
9. Heat loss Small plate heat exchanger only the heat board shell panel exposed to the atmosphere, so the heat loss can be ignored, do not need insulation measures. The shell and tube heat exchanger heat loss, the need for insulation layer.
10. Small capacity is 10% to 20% of shell and tube heat exchanger.
11. not easy to scale due to the internal turbulence, so easy to scale, the scaling factor is only shell and tube heat exchanger 1/3 to 1/10.

发表评论

BLOG

ADDRESS

9-1702 Fuli City Nankai District Tianjin China
Phone: (+86) 22 87348386
Fax: 00862287348386