Plate heat exchanger in accordance with whether the saddle bracket is divided into two kinds of installation

Plate heat exchanger in accordance with whether the saddle bracket is divided into two kinds of installation


During the installation of the plate heat exchanger, sufficient space should be left at both ends of the heat exchanger for maintenance and cleaning. The heat exchanger shall not be operated under the conditions specified in the nameplate, and the temperature and pressure of the heat exchanger medium shall be examined and analyzed to prevent abnormal operation of the heat exchanger. Plate heat exchanger in accordance with whether the saddle bracket is divided into two kinds of installation. The first type, for the saddle-free stent-type plate heat exchanger, the heat exchanger should be installed in the brick saddle on the basis of the installation of the plate after the heat exchanger at the moment without the basic fixed, the whole plate can be with the expansion The change is free to move. The second type, for a saddle bearing plate change, should first be flat on the basis of concrete, to be completely dry with the anchor bolts to the saddle bearing and ground concrete completely fixed.

发表评论

BLOG

ADDRESS

9-1702 Fuli City Nankai District Tianjin China
Phone: (+86) 22 87348386
Fax: 00862287348386