Requirements for shallow – density corrugated plate type plate heat exchangers

Requirements for shallow – density corrugated plate type plate heat exchangers


Ice storage air conditioning system ice slippery system in the heat transfer device water — water temperature difference (5 ℃ / 10 ℃ — 7 ℃ / 12 ℃)
Conventional ice storage system in the heat exchanger ethylene glycol solution – water conditioning ethylene glycol solution temperature of about 3 – 7 ℃
Delivery system to add a drag reducing agent to add ODEAO surfactant water — water temperature small temperature difference, low pressure drop, shallow corrugated plate type
Hydraulic absorption dehumidification air conditioning system dehumidification device
Regeneration unit triethylene glycol solution – cooling water
Triethylene glycol solution — hot water
Triethylene glycol solution — hot air dehumidification
Plate heat exchanger regeneration
Regenerative asymmetric, corrosion resistant
Asymmetric, corrosion resistant, temperature resistant
Asymmetric, corrosion resistant, temperature resistant
Water source heat pump evaporator
Condenser Freon – Water
Freon – water evaporates
Condensation brazing plate type, upright installation
Brazing plate type, upright installation
Ammonia plate for the chiller evaporator ammonia – water evaporation brazing plate type, upright installation
Low temperature brine evaporator freon – water evaporative brazing plate type upright installation

发表评论

BLOG

ADDRESS

9-1702 Fuli City Nankai District Tianjin China
Phone: (+86) 22 87348386
Fax: 00862287348386