Daily maintenance of plate heat exchanger
The gasket plate heat exchanger is a widely used heat energy conversion equipment, and its use greatly improves the working efficiency of the equipment. However, it is inevitable that the plate heat exchanger will have some problems if it is used for a long time. This requires us to do a good job in daily maintenance and try to reduce the occurrence of problems. Today, let’s take a look at the daily protection of plate heat exchangers.
1. The compression nut and the upper and lower guide rods of the plate heat exchanger need to be smoothed with lubricating grease regularly to avoid wear.
2. The conditioning requirements of each instrument are strict and standardized, and it is best to be operated and protected by professionals.
3. Regularly check whether the cleaning of each heat exchanger plate of the plate heat exchanger is complete, whether there are deposits, coking, and scale adhesion, and clean the heat exchanger plates immediately.
4. Check regularly to check whether the adhesion of each heat exchanger plate and the heat exchanger gasket is tight, and whether the heat exchanger gasket itself is intact to avoid leakage caused by degumming and damage of the heat exchanger gasket.
5. Every time the heat exchanger plates and heat exchanger gaskets of the plate heat exchanger are re-compacted, pay attention to the scale position during the last compression, and do not over-compact the heat exchanger gaskets. Reduce the service life of the heat exchanger gasket.
The above is a brief introduction to the daily protection of gasket-type plate heat exchangers. Timed protection and maintenance can not only reduce the occurrence of failures, but also extend the service life of the gasket-type plate heat exchanger equipment. I hope that the above content will protect and maintain the gaskets. Plate heat exchangers can help.
