Integrated Plate Heat Exchanger Products-2
Working principle
The plate heat exchanger unit is to automatically and continuously convert the heat gained from the primary network into the domestic water and heating water for users, namely, the hot water (or steam) enters into the heat exchanger from primary side entrance of the unit, undergoes heat exchange and discharges from primary side exit of the unit; dirt in the secondary side backwater is removed by the filter, then the backwater enters into the heat exchanger through the secondary side circulating water pump for heat exchange, and produces hot water at different temperatures for heating, air conditioning or floor heating, so as to meet user needs.
Functions of New Roc Industrial Limited plate heat exchanger unit (optional according to user needs)
1. Temperature regulating control: the flow of the circulating water is constant, and the heating temperature is automatically adjusted according to the change of environmental temperature, so as to match the heating capacity with the system load, and to achieve the purpose of saving heat energy.
2.Flow regulation and control: the heating temperature is constant, and the circulating water flow rate is automatically adjusted according to the change of environmental temperature and the pressure difference between water supply and backwater, so as to match the heating capacity with the system load, and to achieve the purpose of saving electric energy.
3. Supplementing water pressure control: according to the measured system pressure and the set pressure value of the backwater caliber, the pressure sensor automatically starts and stops the make-up pump or regulates the rotate speed of the make-up pump, so as to stabilize the system pressure, ensure the safety of using heat and maintain normal operation of the system. The pressure control range is determined according to the design requirement.
4.Condensate recovery control: according to the water tank level, the liquid level controller automatically opens and closes the condensate pump, and automatically sends the condensation water back to the boiler room for recycling, thus reducing the waste of softened water and heat. The control range of the condensation water level is determined when delivery.
